Please use this identifier to cite or link to this item:
https://dspace.dsau.dp.ua/handle/123456789/1370
Title: | Вплив режимів експлуатації на зношування деталей, виготовлених з полімерно-композитного матеріалу |
Other Titles: | Influence of operating modes on wear of parts made of polymer-composite material |
Authors: | Аулін, Віктор Васильович Aulin, Viktor Деркач, Олексій Дмитрович Derkach, Oleksii Макаренко, Дмитро Олександрович Makarenko, Dmytro Гринків, Андрій Вікторович |
Keywords: | посівні машини sowing machines полімерно-композиційний матеріал, polymer-composite material швидкість ковзання slip speed зазор clearance триботехнічні характеристики tribo technical characteristics |
Issue Date: | 2018 |
Publisher: | Хмельницький національний університет |
Citation: | Аулін В. В. Вплив режимів експлуатації на зношування деталей, виготовлених з полімерно-композитного матеріалу / В. В. Аулін, О. Д. Деркач, Д. О. Макаренко, А. В. Гриньків // Проблеми трибології. – 2018. №4 – С. 65-69. |
Abstract: | Доведено, що основними факторами умов експлуатації, які впливають на триботехнічні характеристики рухомих з'єднань є навантаження, лінійна швидкість ковзання та зазор в спряженнях деталей. Виявлено, що суттєвий вплив на триботехнічні характеристики здійснює навантаження на трибоспряження деталей в той час, як відносна швидкість ковзання практично не впливає на них. Встановлено, що величина зазору в спряженні деталей при мінімальному значенні навантаження практично не змінюється величина зносу деталей. Мінімальне значення зносу становить (6,4 · 10-3 г) при наступних режимах експлуатації: Р = 250 Н та v = 0,1 м/с, S = 300 мкм. При розробці математичної моделі впливу режимів експлуатації на величину зношування, складали схему планування експерименту при трьох факторах: швидкість ковзання, навантаження та зазор у спряженнях зразків Отримана регресійна модель дозволяє оптимізувати параметри рухомих спряжень деталей в залежності від умов їх експлуатації. To achieve the goal, the following tasks were performed: to substantiate the regularity of the wear of parts of moving conjugates depending on the conditions of operation and to determine the rational modes of their work. It is proved that the main factors of the operating conditions that affect the tribotechnical characteristics of the mobile connections are the load, the linear speed of sliding and the gap in the joints of the parts. It was revealed that significant influence on the tribotechnical characteristics carries the load on the detachment of three parts while the relative slip speed practically does not affect them. It is established that the size of the gap in the conjugation of parts with a minimum load value does not change the value of wear of parts. The minimum wear value is (6.4 · 10-3 g) with the following operating modes: P = 250 N and v = 0.1 m / s, S = 300 microns. In developing the mathematical model of the influence of operating modes on the amount of wear, they compiled the scheme of planning theexperiment in three factors: slip speed, load and gap in conjugation of samples. The obtained regression model allows to optimize the parameters of moving parts of the joints depending on the conditions of their operation. |
URI: | http://tribology.khnu.km.ua/index.php/ProbTrib/article/view/692/1173 http://dspace.dsau.dp.ua/jspui/handle/123456789/1370 |
Appears in Collections: | Наукові статті |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
№ 8_Проблеми трибології ст. 65-69.pdf | 236,7 kB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.